Page 89 / 141
DTUS065 rev A.7 – June 27, 2014
For each frame received by this zone with matching source IP, frame
protocol and public destination port, the frame’s destination port and
destination IP address will be rewritten as specified.
Name:
Rule name. You can assign a symbolic name to the rule.
Source IP:
Sets the expected source IP of the input frame. If this field is blank, any IP
match.
Frame Protocol:
Sets the expected protocol type: UDP, TCP, TCP & UDP or all.
Public port:
Sets the expected destination port of the input frame on this zone. You can
specify either a single port or a port range (using a dash “-“ between the
starting and ending ports). If this field is blank, any port will match.
Private Port:
The NAT will replace the original destination port by this private port in the
frame before sending it on the private side. If this field is blank, the port (or
port range) is left unchanged. If a public port range is used, the private port
must be a port range of the width.
Destination IP:
The NAT will replace the original destination IP address by this private IP
address in the frame before sending it on the private side.
This field cannot
be blank
.
e.
Firewall
This section it used to restrict or allow the use of services provided on the
device (locally in the product) or in other zone.
