Acksys ETHERNET TO Wi-Fi GATEWAYS Скачать руководство пользователя страница 74

Страница: 74 / 141

Page 74 / 141

DTUS065 rev A.7 – June 27, 2014

Advanced settings tab in “Point to multipoint station (ad-hoc)” mode

BSSID:

This option allows setting the BSSID for this interface.

Advanced settings tab in “Client” mode

Bridging mode:

This option allows selecting the bridging method (Please see section

Wired

to wireless bridging in infrastructure mode

for more details) that will be used

if this interface is added to a bridge (please see section

Network

for more

details).

The available methods are:

•

ARPNAT (default value)

•

4 addresses format (WDS)

•

Wired device cloning

•

PROFINET device cloning. This feature requires LLDP forwarding.
Please read the section

Network configuration

for more details.

Please read the section

Cloning

for more details on cloning mode.

Key cache life time:

If your AP supports the Opportunistic key caching (OKC) or the pre-
authentication, this option allows configuring the life time for each PMK.

The default value is 43200 seconds (12 hours).

Do not cache old scan results:

When checked, the scan results of the previous scan cycle is not merged
with the results of the current scan cycle.. This option is checked by default.

Содержание ETHERNET TO Wi-Fi GATEWAYS














































































































































Результаты поиска

Содержание ETHERNET TO Wi-Fi GATEWAYS

Отзывы:

Бренды по названию

Популярные бренды

Acksys ETHERNET TO Wi-Fi GATEWAYS, Руководство пользователя

Результаты поиска

Содержание ETHERNET TO Wi-Fi GATEWAYS

Отзывы:

Бренды по названию

Популярные бренды