ACKERMANN 16-2083, Руководство пользователя

Страница: 7 / 20

Ackermann
Page: 7 // 20
SHAVER SYSTEM
6. InSTallIng THe boTTle HolDerS
There are two separate bottle holders included to support bottle with irrigation liquid and secretion container. Please
install both bottle holders left and right to the bottom of pump using the four fixing screws provided (see illustration).
Insert containers into the holders and connect tubing set (see chapter 9.4.).
Illustration of bottle holders:
7. SPIkE
7.1. HanDlIng oF SpIke
The spike is needed to connect tubing set to the bottle with irrigation liquid. Push spike completely into the bottle with
irrigation liquid. To ensure proper function venting hole must be placed inside the bottle but above liquid level. Tip of spike
must always be completely immersed in the liquid. Connect tubing set IRRIGATION (see chapter 9.4.). Place bottle with
inserted spike only in upright position! Use bottle holder on pump. Only original spike ensures proper function of pump.
CAUTION! Use only original spike! Clean and sterilize spike before initial application and any further use.