ACKERMANN 16-2000-700 Скачать руководство пользователя страница 50

Страница: 50 / 134

USER MANUAL 16-2000-700/701/702/703

Rev. 05/2018

8.4

HF 16-2000-700

system activation methods

The

HF 16-2000-700

system can be activated:



using the handle,



using the footswitch,



using the AutoStart function (in bipolar coagulation mode).

8.4.1 Activation from handle

To activate the system using the handle, connect a handle with two buttons
(cutting and coagulation).
The output, to which the instrument is plugged, is activated.
The activation parameters correspond to those set on the panel corresponding to

the activated output.
The yellow button is used to activate cutting, and the blue button is used to

activate coagulation.

8.4.2 Activation from footswitch:

a) universal socket for footswitch which is supporting all outputs

(Fig. 4, item 1)

; when using the switch connected to this socket, it is possible

to activate the cutting and coagulation modes in all four outputs of the system.

The output indicated using the footswitch-controlled output selection button is
activated

(Fig. 6, items 1, 2, 3, 4).

b) socket for footswitch which is supporting one of output - assigned by default
to the third ASD output

(Fig. 4. item 2)

; it is possible to activate output 3 using

the second footswitch socket. The second footswitch socket allows to activate
cutting and coagulation always in the third output.

– footswitch active

– footswitch inactive

Page: 50 of 134

Содержание 16-2000-700







































































































































Результаты поиска

Содержание 16-2000-700

Отзывы:

Похожие инструкции для 16-2000-700

Бренды по названию

Популярные бренды

ACKERMANN 16-2000-700, Инструкция по эксплуатации

Результаты поиска

Содержание 16-2000-700

Отзывы:

Похожие инструкции для 16-2000-700

Бренды по названию

Популярные бренды