background image

Automation Components, Inc.

2305 Pleasant View Road  |  Middleton, WI 53562

Phone:

 1-888-967-5224  |  

Website:

 workaci.com

Page 6

PRODUCT SPECIFICATIONS

Version 6.0

I0000546

4-20 mA:

 250 Ω Load: 15 - 40 VDC / 18 - 28 VAC  |  

500 

Ω 

Load:

 18 - 40 VDC / 18 - 28 VAC

0-5 VDC:

 12 - 40 VDC / 18 - 28 VAC  |  

0-10 VDC:

 18 - 40 VDC / 18 - 28 VAC

Voltage Output:

 8 mA max (0.32 VA)  |  

Current Output:

 24 mA max (0.83 VA)

4-20 mA: 

700 Ω maximum  |  

0-5 VDC or 0-10 VDC:

 4K Ω Minimum

2-wire:

 4 - 20 mA (Default)  |  

3-wire:

 0-5 or 0-10 VDC and 4 - 20 mA (Field Selectable)

+/- 1% over 20% RH Range between 20 to 90%  |  +/- 2%, 3%, or 5% from 10 to 95%
0-100%
0 to 95% RH, non-condensing (Conformally Coated PCB’s)
-40 to 140 °F (-40 to 60 °C)
-40 to 149 °F (-40 to 65 °C)
Less than 2% drift / 5 years | 0.5% RH | 0.1% RH
20 Seconds Typical
Capacitive with Hydrophobic Filter
30 Minutes (Recommended time before doing accuracy verification)
Screw Terminal Blocks (Polarity Sensitive)  |  16 (1.31 mm²) to 26 AWG (0.129 mm²)
4.43 to 5.31 lb-in (0.5 to 0.6 Nm)

“-4X” Enclosure: 

Polystyrene Plastic, UL94-V2, NEMA 4X (IP 66)

“-EH” Enclosure:

 ABS Plastic with UV Protectant, UL94-VO

“-EH” Enclosure:

 304 Series Stainless Steel  |  304 Series Stainless Steel

“-4X” Enclosure:

 Schedule 40 PVC (White)  |  Slotted PVC without filter

A/CSI: 

10 KΩ nominal (Green/Yellow)

A/10KS: 

10 KΩ nominal (White/Blue)

A/10K-E1:

 10 KΩ nominal (Gray/Orange)

A/20K:

 20 KΩ nominal (Brown/Blue)

A/100KS: 

100 KΩ nominal (Black/Yellow)

A/10K-E1 Series:

 +/- 0.3 °C (+/- 0.54 °F)

All Else:

 +/- 0.2 °C (+/- 0.36 °F) 

A/1K:

 1 KΩ nominal

@ 60 °C (140 °F):  

+/- 0.27 °C  (+/- 0.49 °F)

@ 21.1 °C (70 °F):

 +/- 0.17 °C (+/- 0.34 °F)

@ 54.4 °C (130 °F):

 +/- 0.56 °C  (+/- 1. 00°F)

SENSOR SPECIFIC

RH Supply Voltage: 
(Reverse Polarity Protected)
RH Supply Current (VA): 
RH Output Load Resistance: 
RH Output Signal: 

 

RH Accuracy @ 77°F (25°C): 
RH Measurement Range:
Operating RH Range: 
Operating Temperature Range:
Storage Temperature Range:
RH Stability | Repeatability | Sensitivity:
RH Response Time (T63):
RH Sensor Type:
RH Transmitter Stabilization Time:
RH Connections | Wire Size:
RH Terminal Block Torque Rating:
Enclosure Specifications (Flammability, 
Temperature, NEMA/IP Rating): 
Sensing Tube Material | Filter Material:
  

SENSOR NON-SPECIFIC

Lead Wire Length
Insulation Rating

THERMISTOR 

Sensor Output @ 25 °C (77 °F):

(Lead Wire Colors)

Accuracy @ 0-70 °C (32 - 158 °F):

PLATINUM

Sensor Output @ 0 °C (32 °F):
Accuracy:

NICKEL 

Sensor Output @ 21.1 °C (70 °F):
Accuracy:

BALCO 

Sensor Output @ 21.1 °C (70 °F):
Accuracy:

14” (35.6 cm) | 22 AWG (0.65 mm)
Etched Teflon (PTFE) Colored Leads | Mil Spec 1678/4 Type E

A/1.8K: 

1.8 KΩ nominal (Red/Yellow) 

A/3K:

 3 KΩ nominal (White/Brown)

A/AN (Type III):

 10 KΩ nominal (White/White)

A/AN-BC: 

5.238 KΩ nominal (White/Yellow)

A/CP (Type II):

 10 KΩ nominal (White/Green)

A/1.8K Series:

 +/- 0.5 °C @ 25 °C (77 °F)

 

 and (+/-1.0 °C) (+/-1.8 °F) 

A/100: 

100 Ω nominal 

+/- 0.06% Class A (Tolerance Formula: +/- °C = (0.15 °C + (0.002 * |t|))
 

where |t| is the absolute value of Temperature above or below 0 °C in °C)

@ -40 °C (-40 °F):

  +/- 0.23ºC (+/- 0.414ºF)

@ 0 °C (32 °F):

  +/- 0.15 °C (+/- 0.27 °F)

1 KΩ nominal (Red/Red)

@ -40 °C (-40 °F):

 +/- 1.52 °C (+/- 2.73 °F)

@ 0 °C (32 °F): 

+/- 0.4 °C (+/- 0.72 °F)

1 KΩ nominal (Orange/Yellow)

@ 21.1 °C (70 °F): 

+/- 1%

REL

A

TIVE HUMIDITY SPECIFIC

A

TIONS

TEMPER

A

TURE SENSOR SPECIFIC

A

TIONS (

OPTIONAL)

Содержание DUCT HUMIDITY SERIES








Отзывы:

Похожие инструкции для DUCT HUMIDITY SERIES