8
The tool set for maintaining the India Mark II Pump
(Refer to the U2 and U3 installation manuals)
Tool
Use
Picture
Rod lifter
For lifting and lowering the
rods
File
For filing the top of connect-
ing rods after cutting
Hammer ball point
For driving out/in the handle
axle bolt.
Pipe wrenches
(600mm)or (450mm)
For tightening/enlightening
of the rising mains during
installation or dismantling of
the pump.
Handle axle punch.
Used to drive out the handle
axle bolt without damage to
the threads.
A center punch
Used to remove the broken
ball bearing from the bearing
housing.
Oil can ¼ litre
For cooling during cutting of
treads.
Steel brush
Used for brushing/ cleaning
the threads cut.
Coupling spanner
Used for holding firm the
Nuts/ bolts when tightening
or loosening
Chain supporting tool
Provides support to the
chain
Screw driver
For screwing the bolts for
the button dice.
