ATV/Motorcycle Computer
ACE-1000/1100 User Manual
1
2
3
4
7
9
MADE IN TAIWAN
RESET
10R-029648
RESET
5
6
8
PANEL DESCRIPTIONS
1. Tachometer Scale
2. Bar Tachometer
3. Other functions
4. Thermometer*
5. RESET Button
6. MODE Button
7. Fuel Gauge
8. RPM Warning Indicator
9. Temperature*/Fuel gauge
warning LED
FUNCTIONS
SPECIFICATIONS
Power Input
Tachometer Sensor
Temperature Sensor*
Power Consumption
Dimensions
DC 12V
CDI or Ignition Coil Signal
Thermo Sensor
50uA at clock mode
1mA at on status without backlight and all sensors off
2mA at all sensors on status without backlight
15mA at on status with 3 sec. backlight
25mA at on status with continue backlight
110.0mm x 55.0mm x 21.5 mm)
Function
Specifications
Simbolo
Bar Tachomete
500-10,000 rpm
1,000-20,000rpm options
100-19,900rpm
Total Hour Meter
0-999999H
Digital Tachometer
Maintain Reminder
1-9999 hours
Hour meter 1&2
0-99H59`59``
100Ω, 250Ω, 500Ω options or
1-7 Bar-graphic
Maximum Thermometer*
Voltage Gauge*
V
8.0-18.0 Volt
Digital Thermometer*
rpm
12/24 Hour Clock
0:00`-11H59`/23H59`
RT 1&2
Bar-Fuel Gauge
RT1
or RT2
10R-029648
RPM sensing wire mounting:
1. Signal intensity from ignition coil is dependent on vehicle type.
2. Circles 2-5 turns around ignition coil, with more turns creating
steadily stronger signal, fewer turns creating weaker signal.
3. The RPM circuit is designed for most bikes, however partial
bikes’ signal is too strong if the RPM looks like much more than
actual RPM and unstable, please serial connect the attached 1M
Ohm resistor to solve it.
2-5
CDI
Ignition Coil
Tuns
RPM-INPUT
Either One
Thermo Sensor and Sensor Tube* :
1. The unit includes a water temperature sensor; you have to
purchase a suitable water pipe temperature sensor tube to
install the sensor easily. It is not need to purchase sensor
tube in case your bike matches PT1/8 temperature sensor
and the attachment is PT1/8 sensor.
2. Cut the water pipe, insert the temperature tube into the
pipe and secure it by attached pipe clamps.
3. Screw the sensor into the tube.
BAR RPM: Bar Graphic Tachometer
The bar tachometer has 10,000rpm and 20,000rpm options.
RPM: Digital Tachometer
1. It displays digital tachometer up to 19,900RPM.
2. Tachometer signal can pick up from either CDI or
Ignition Coil Signal.
Shift Warning RPM
1. The function enables you to set up a shift warning RPM.
2. Shift warning LED indicator flashes when RPM reaches
setting value, and stop flash after you shift gear.
RT 1&2: Hour Meter 1&2
1. Calculates total engine operation time from last RESET.
2. Count automatically begins with engine starting.
TT: Total Hour Meter
1. Calculates total engine operation time from the
beginning of the computer.
2. TT data is stored in memory, and couldn’t be reset.
: 12/24 hour Clock
It displays 12 or 24 hour current time.
: Digital Thermometer*
1. The thermometer always displays on the right side of the screen.
2. It displays -L- C or -L- F when temperature is lower than
50 C or 122 F, and displays -H- C or –H- F when
temperature is over 180 C or 356 F.
3. The thermometer digits and warning LED indicator flash when
the thermo sensor detects temperature over the presetting
warning temperature.
FEATURES
Displays bar-graphic tachometer, digital thermometer*,
bar fuel gauge and one additional function at the same time.
Bar-graph tachometers with selectable 10,000rpm or
20,000rpm redline.
Two sets of maintenance reminders to remind you it is time to service
your bike.
Fuel gauge includes 100, 250 and 510 Ohm options for fuel meter
input resistance, as well as “fuel gauge off” mode.
Includes main unit, bracket, RPM sensing wire, thermo sensor*,
fitting kits and wiring harness.
Thanks for bought the ATV/Motorcycle computer; this manual is designed for ACE-1000/1100 series.
ACE-1000 does not have functions of thermometer and volt meter; *all descriptions relative to these functions are for ACE-1100 only.
English
INSTALLATION
Rubber Pad
Washer
Spring Washer
Fixing Screw Nut
Main Unit
Mounting
Main Unit Mounting
