RESET+
MODE
2 Sec
RESET
Mode
Mode
Mode
Mode 2 Sec
Mode
RESET
Mode
Mode
Clock: Hour
Clock: Minute
RPM: 10,000 / 20,000
RPM Warning: 1000 ~19,900
Engine Signal: 0.5/1.0/2.0/3.0
Mode
Mode
Fuel Type: 100 / 250 / 510 / off
Maintain Reminder 1: 1~9999
Temp. Warning: 40 ~ 180 C
Mode
Mode
Mode
Unit: C / F / off
Maintain Reminder 2: 1~9999
Mode
1 Setup operations include 12/24 hour clock, bar rpm scale, shift
warning RPM, numbers of engine rotation per signal, units of
thermometer*, temperature warning*, fuel meter input resistance
selection and maintain reminder setting. These must be set up step
by step. The computer will be automatic reversion to normal mode
if no button operation for 75 seconds at any setting screen.
2. Press both MODE & RESET buttons to go into setting screen. In
setting screens, each press RESET button to add the flashing digit
by 1 or convert units, press MODE button to confirm the digit
setting and jump to next digit or next setting screen to be set.
Press MODE button for 2 seconds at any setting screen to finish
the setting and go to normal mode.
3. It displays " 12 or 24H, “ XX:XX " and “A” or “P” symbols in case you
select 12H. Operates buttons as descriptions of item 2 to finish
clock setting and jump to 10,000/20,000rpm scale setting.
4. It displays 10,000rpm scale, press RESET button to convert 10,000
or 20,000rpm. Press MODE button to confirm the setting and jump
to shift RPM warning setting.
5. It displays the default "r 06500", the digit “0” flash. Follow the item
2 of button operation to finish the shift RPM warning setting and
jump to engine specification setting.
6. It displays "RPM SPC-X.X", the default value is 1.0; there are 4
options: 1.0, 2.0, 3.0 and 0.5. It means the numbers of engine
rotation per signal. For example the value 2.0 means the engine
rotate 2 turns to output a signal.
7. Press RESET button to move in loop sequence from one to another
value of the 4 values. Press MODE button to confirm the setting
and go to temperature unit setting screen.
8. It displays " C , F or oFF ", each press of RESET button converts C, F
or OFF, the temperature icon and digits will disappear when you
select oFF mode; press MODE button to confirm temperature setting
and jump to temperature warning setting.
9. It displays "XXX" and the selected unit. Follow the item 2 of button
operation to finish the temperature warning setting and go to fuel
sensor resistance setting.
10. It displays “100r” and fuel tank symbol, follow the item 2 to select
100r, 250r, 510ohm or oFF and jump to maintain reminder setting..
The fuel meter bar will disappear if you select oFF mode.
11. It displays “ RT1 or RT2 “symbols and “ XXXX ”, the default of RT1
is 3 hours and RT2 has default of 10 hours, follow item 2 to setting a
desired hours of maintain reminders and jump to normal mode.
Clock, RPM,Temperature and fuel meter SET UP
