Connections
Connecting to the Power Supply
Plug the main lead (marked AC Cord on the rear of the player) into an appropriate socket
Press the Power button to switch your Player on.
The present product can be used under the AC 100~240V~. 50/60Hz
<NOTE>
¾
Before plugging your player into a main socket, you must check the voltage.
Connecting the Video Out to TV
METHOD 1, COMPONENT (Progressive Scan) Video
Connect a component video cable from the Pr, Pb and Y jacks on the back panel of the player to the corresponding jacks
on your television.
This outputs monochrome(Y), Blue(Pb) and Red(Pr) separately and produces the best quality image of 720P.
METHOD 2, S-VIDEO
Connect the S-Video out jack on the back panel of the player to the S-VIDEO in jack on the TV using the S-Video cable
METHOD 3, COMPOSITE VIDEO
Connect the supplied video cable from the VIDEO OUT jack on the player to the VIDEO IN jack on your TV.
METHOD 4, SCART VIDEO
Connect a SCART cable from the SCART OUT jack on the back panel of the player to the SCART IN jack on your TV.
It has the Composite Video output and Analog Audio output.
METHOD 5, VGA VIDEO
Connect a VGA cable from the VGA OUT jack on the back panel of the player to the VGA IN jack on your TV or
Monitor.
※
[NOTE] You must turn On the power of VGA monitor before connecting the VGA cable to the player. Otherwise, the
player may not work normally.
9
www.acesonic.com
