Connections
Connecting with Microphones
When you connect the Microphone to the Player directly
¾
Connect the Microphone plug into the jack on the front of the player
¾
Turn the microphone “On” using the ON/OFF switch on the body of the microphone
¾
Adjust the Microphone Volume and Echo Level to a desired level
<NOTE> To avoid feedback noise, do not place your hands near the top of the microphone and do not point the
microphone directly at the output speaker. If feedback occurs, lower the volume control.
When you connect the Microphone to the Amplifier
¾
Connect the Microphone into the Amplifier
¾
Turn the microphone “On” using the ON/OFF switch on the body of the microphone
¾
Adjust the Microphone Volume and Echo Level to a desired level
¾
In order to get scoring after singing each song, you must connect the RCA cable from MIC out Jack of Amplifier to
“EXT” jack of the player.
Connecting with USB devices
You can enjoy the Karaoke and media files such as MP3+G, Movies, Music and Photos saved in USB memory, MP3
Player, IPOD, External HDD in high audio quality of 5.1CH home theater sound by connecting the storage device to the
USB port of the player.
¾
Connect the USB device to the USB port on the front of the player.
¾
If a disc does is not in the DVD tray, the player will read the USB directly. However if a disc is in the DVD tray,
press “
USB/DISC
” button on the remote control at stop mode to select USB mode.
¾
Use the arrow buttons to select the file and press “ENTER or PLAY”
SUPPORTED FILE FORMAT:
MP3+G, MPEG1(*.MPG, *.DAT), MPEG4(*.AVI, *.MP4), MP3, JPEG(*.JPG)
SUPPORTED SYSTEM: FAT16/32
files system only
※
NTFS file system is not supported.
SUPPORTED DEVICES:
The player has the
USB Host (V.1.1)
port so you can connect following devices with the player.
¾
USB devices
that support USB Mass Storage v 1.0.
¾
MP3 Player
: IPOD and flash type MP3 Player.
¾
USB card Reader
: One slot USB card reader and Multi slot card reader
¾
Digital camera
: Cameras that support USB Mass Storage v.1.0.
¾
USB HDD and USB flash drive
: Devices that support USB2.0 or USB 1.1.
※
For the USB HDD, make sure to connect an auxiliary power cord to the USB HDD for proper operation and you
must turn on the power of USB HDD before connecting to the player and must pull out the USB HDD from the
player before turning the power of the player off.
< NOTE >
¾
Some High Resolution Video files cannot be played properly from USB because of the USB Host(v.1.1) speed of
the player.
¾
Some MP3 players may not operate depending on the sector size of their file system.
¾
Digital Cameras that use PTP protocol or require additional program installation when connected to a PC are not
supported.
¾
The player may not fully support parts of memory card or a multi card reader.
¾
Do not insert or pull out the memory card from the card reader when using the card reader.
¾
If you use a USB extension cable, the USB device might not be recognized.
11
www.acesonic.com
