6
Product Introduction
Product accessories
+
Machine Body
Filter
Remote Control
with Battery (CR2032)
Power Cord
1
2
4
5
3
User Manual &
Warranty Card
Remote control battery installation
1. Remove the battery cover by
pressing the left button lightly
and pulling the battery cover
down.
Open
2. Place the battery
positive (+) side up.
3. Push the battery cover
back to its original outlet
and close it completely.
Close
Open
Install
Close
Remote control precautions
●
The remote control must face the receiver directly (Face the remote control
downwards and aim it at the operation panel for use).
●
The usage range of the remote control is approximately within 500cm to the front
of the receiver; if the remote control is not faced towards the receiver, its usage
range will be reduced.
●
Do not place any obstacles between the receiver and the remote control.
●
Please keep the remote control properly; avoid impacts and dropping. Please
remove the battery when not using the remote control, and keep it in a safe place.
