Acer TravelMate 610 series, Руководство по обслуживанию, Страница: 51 / 132

Chapter 2 43
4.
Exit to main menu:
USB Test
This function will test USB Connect/Disconnect of TravelMate 610 notebook series.
UHCI/OHCI test utility:
1. Please prepare a USB device such as USB mouse, USB keyboard, USB floppy diskette or USB modem,
and leave the USB ports disconnected.
NOTE: The diagnostic program will not be interrupted by disconnecting the USB diskette.
2. The program will dynamically detect the incoming device for 2 USB ports. Plug the USB connector on the
first USB port, then un-plug it (connect at one time and disconnect at another time). To continue testing
the second USB port, repeat the connect/disconnect procedure.
The testing program will show an account of connection/disconnection if every step is doing right.
Consequently, a "PASS" message appears on the screen, otherwise, it displays "FAIL".
Smart Card Test
Insert Smart Card into the socket of the left panel. If it is doing well, the message "PASSED!!!" will be shown on
the screen.
Infrared Ray (IR) Test
This function will test Infrared Ray of Acer TravelMate 610 series. Following are the steps:
1. Please prepare 2 machines. Choose "Test_program for Server" for one of the machines and choose "1"
for Baud_Rate.
2. Choose "Test_program for Client" for the other machine.
3.
Make the IR ports of the 2 machines close, then, after the detection between the two machines, the pass
or fail message will appear on the screen.
Running PQA Diagnostics Program
Press
→←
→← →←
→←
to move around the main menu. Press Enter to enable the selected option. The main options are
Diag, Result, SysInfo, Option and Exit.
The Diag option lets you select testing items and times.
The following screen appears when you select Diag from the main menu.
PQA Vx_x xx-xx-xx
Diag
Result
SysInfo Option
Exit