![background image](http://html1.mh-extra.com/html/acer/smart-touch-kit-ii/smart-touch-kit-ii_user-manual_3983918008.webp)
At last, fix the supporting bracket to the projector with matched small screws
(shown as the following images):
Note:
Bracket 1 and bracket 2 are optional. Please refer to actual packaging
accessories.
Install the emitter module:
Install the module approximately 3cm above the projection surface and make it
aligned with the center of the image.
The module is equipped with magnets, allowing it to be attached to
whiteboards directly. If the module needs to be installed on a location where
magnets cannot be used, it can be fixed in place using 3M adhesive tapes or
screws.
5