Information for Your Safety and Comfort
Read these instructions carefully. Keep this document for future reference.
Follow all warnings and instructions marked on the product.
Caution for plugs when disconnecting devices
Observe the following guidelines when connecting and disconnecting power to
the external power supply unit:
• Install the power supply unit before connecting the power cord to the AC
power outlet.
• Unplug the power cord before removing the power supply unit from the
emitter module.
• If the system has multiple sources of power, disconnect power from the
system by unplugging all power cords from the power supplies.
Caution for Accessibility
Be sure that the power outlet you plug the power cord into is easily accessible
and located as close to the equipment user as possible. When you need to
disconnect power from the equipment, be sure to unplug the power cord from
the electrical outlet.
Warnings
• Do not install the camera module and the emitter under direct sunlight or
reflected sunlight. Please use the standard USB cable that came with our
product, and do not replace it with any other cable.
• Do not expose your eyes directly to the light outlet of the emitter within 40cm.
• Do not look into the bulb of the projector directly.
• Do not drop the product above 1m height.
The deviation of flatness for the projection whiteboard is +/-2mm.
• Do not use this product near water. Please use our product in an environment
with qualified temperature and humidity according to the product requirements.
• Be careful when fixing the camera module on the projector at a high position;
if the product drops, it could be seriously damaged.