English 15
Resetting Lamp Timer
If replacing the lamp after 1500 hours of operation, please carry out the following operation within 10
minutes of powering on.
OSD
FUNCTION
Press the Exit button on the projector for 3
seconds or the Exit button on the remote
control for 3 seconds and display the total lamp
usage time.
Press the Menu button on the projector or the
remote control while the lamp usage time is
being displayed, and the lamp hour display will
be active and adjustable.
Select the "Reset" item on the screen using
the
buttons or on control pad or remote.
Lamp Hours Used/Reset
OSD
Main OSD Menu
Press the “Menu” key and the main OSD menu structure
will appear as shown at right (Fig. 23). Whenever AV box is
attached, 4 subpages appear in the menu: Display page,
Image page, Control page, and Source page. However if
input is from PC and no AV box is attached, Source will
disappear in the menu.
Press the “Menu” key again to enter Display page items, or
press “
” or “
” to select sub-pages. (The main OSD
menu will automatically disappear if a key is not pressed
within 10 seconds).
Press the “Exit” button to leave the current sub-page, and
press the button again to leave the main OSD menu (at the
same time the settings are saved).
Input status
PC input without AV box
PC input with AV box
Video input with AV box
Subpage
Display
Image
Control
Display
Image
Control
Source
Display
Image
Control
Source
Figure 20 Main OSD menu
Downloaded From projector-manual.com BenQ Manuals
