English 12
iii.
“CHANGE THE LAMP!” will blink on the screen together with a red LED if the lamp has been
operated for more than (*1500) hours (see figure 18). The power will turn off automatically after
10 minutes. All three of the above messages will not display for more than 3 minutes, but each
message will be displayed whenever you turn on the lamp.
Figure 16 Lamp replacement warning signal
Figure 17 Lamp replacement warning signal II Figure 18 Lamp replacement warning signal II
2.
Lamp is not well attached
If the LED blinks rapidly, it indicates that the lamp is not attached properly.
3.
Temperature is too high
If the projector’s internal temperature is too hot to operate safely, the LED will blink slowly for one
minute and then the lamp will turn off automatically.
4.
Normal status
If the LED light is off, it means the lamp and temperature inside the projector are normal.
Caution:
The lamp indicator will light when the lamp becomes too hot. Turn off the power and let the projector cool for 45
minutes, then turn it on again. If the indicator is still shining, contact your dealer.
Downloaded From projector-manual.com BenQ Manuals
