background image

Safety Information |

7

Safety Information

SAFETY PRECAUTIONS

Please note the following when setting up and using the display:

DO NOT OPEN THE DISPLAY.

 There are no user serviceable parts inside and opening or

removing covers may expose you to dangerous shock hazards or other risks. Refer all
servicing to qualified service personnel.

• Do not spill any liquids into the cabinet or use your display near water.

• Do not insert objects of any kind into slots on the display, as they may touch dangerous voltage

points, which can be harmful or fatal or may cause electric shock, fire or equipment failure.

• Do not place any heavy objects on the power cord. Damage to the cord may cause shock or

fire.

• Do not place this product on a sloping or unstable cart, stand or table, as the monitor may fall,

causing serious damage to the display.

• Do not mount the display face up, face down or upside down for an extended period of time as

it may cause permanent damage to the screen.

• The power supply cord you use must have been approved by and comply with the safety

standards of your country. (Type H05VV-F 3G 1mm2 should be used in Europe)

• In UK, use a BS-approved power cord with melded plug having a black (13A) fuse installed for

use with this display.

• Do not place any objects on top of the display and do not use the display outdoors.

• Do not bend, crimp or otherwise damage the power cord.

• Do not use the display in high temperature, humid, dusty, or oily areas.

• If display glass is broken, do not come in contact with the liquid crystal and handle with care.

• Allow adequate ventilation around the display, so that heat can properly dissipate. Do not block

ventilated openings or place the display near a radiator or other heat sources.

• The power cable connector is the primary means of detaching the system from the power

supply. The monitor should be installed close to a power outlet, which is easily-accessible.

• Handle with care when transporting. Save packaging for transporting.

• Please clean the ventilation holes on the back of the display at least once a year to remove any

dust or dirt.

• Do not use the display under rapid temperature and humidity change condition or avoid cold air

from air-conditioning outlet directly, as it may shorten the lifetime of the display or cause
condensation. If condensation happens, let the display stand unplugged until there is no
condensation.

• The touch panel glass is not safety glass and is not laminated. As with other glass, the touch

panel glass may break into sharp pieces if misused, dropped, or otherwise subjected to a
substantial shock. If touch panel glass happens to break, please use care to avoid injury.

• DO NOT tap the monitor with hard or pointed objects, such as a pen or pencil.

Содержание DT653















































Отзывы: