background image

Manufacturer’s Recycling and Energy Information |

43

Manufacturer’s Recycling and Energy 

Information

IT Equipment Recycling Information

Acer is strongly committed to environmental protection and views recycling, in the form of
salvaging and disposal of used equipment, as one of the company's top priorities in minimizing the
burden placed on the environment.

We at Acer are very conscious of the environmental effects of our business and strive to identify
and provide the best working procedures to reduce the environmental impact of our products.

For more information and help when recycling, please go to this website: http://www.acer-
group.com/public/Sustainability/

Visit www.acer-graoup.com for further information on the features and benefits of our other
products.

Disposal instructions

Do not throw this electronic device into the trash when discarding.

To minimize pollution and ensure utmost protection of the global environment, please recycle. For
more information on the Waste from Electrical and Electronics Equipment (WEEE) regulations,
visit http://www.acer-group.com/public/Sustainability

Energy Saving

This monitor features an advanced energy saving capability. When a Display Power Management
signal is sent to the monitor, the Energy Saving mode is activated. The monitor enters a single
Energy Saving mode.

*1: without any option, with factory settings.
*2: depends on destination.
*3: VGA input only.

Mode

Power consumption

LED color

Normal Operation*1, *2

Approx. 140 W

Green

Energy Saving Mode*1, *3
(Power Save)

Less than 0.5 W

Amber

Energy Saving Mode*1, *3
(AUTO STANDBY)

Less than 0.5 W

Red

Power Off

Less than 0.5 W

Red

Содержание DT653















































Отзывы: