Chapter 2
43
PnP/PCI Configuration
The following table describes the parameters found in this menu. Settings in
boldface
are the default and
suggested settings.
NOTE:
It is strongly recommended that only experienced users should make any changes to the default
settings.
Parameter
Description
Options
Reset Configuration Data
Selecting “Enabled” to reset Extended System
Configuration Data (ESCD) only if you installed
a new add-on and the system reconfiguration
has caused such a serious conflict that the
operating system can not boot. Otherwise, you
should leave it unchanged.
Disabled
Enabled
Resources Controlled By
This BIOS can automatically configure all of the
boot and Plug and Play compatible devices. You
can also set it as Manual and go into each of the
sub menu to choose specific resources.
Auto (ESCD)
Manual
IRQ Resources
The items are adjustable only when “Resources
Controlled By” is set to Manual. By pressing
“Enter” to access the sub menu.
Press Enter
PCI/VGA Palette Snoop
Disabled - Data read or written by the CPU is
only directed to the PCI VGA device’s palette
registers.
Enabled - Data read or written by the CPU is
directed to both the PCI VGA device’s palette
registers and the ISA VGA device’s palette
registers, permitting the palette registers of both
VGA devices to be identical.
Disabled
Enabled
*If any ISA bus adapter in the
system requires VGA Palette
snooping, the setting must be set
to “Enabled”.
Reset Configuration Data
[ Disabled ]
Item Help
Menu Level
X
Resources Controlled By
[ Auto (ESCD) ]
X
IRQ Resources
[ Press Enter ]
PCI /VGA Palette Snoop
[ Disabled ]
PnP/PCI Configurations
KLIJ
: Move Enter: Select +/-/PU/PD: Value F10:Save ESC: Exit F1: General Help
F5: Previous Values F7: Optimized Defaults
Phoenix - AwardBIOS CMOS Setup Utility
Содержание Aspire SA60
Страница 8: ...IX Table of Contents Appendix C Online Support Information 103 ...
Страница 15: ...Chapter 1 7 Block Diagram ...
Страница 97: ...89 Chapter 6 Exploded Diagram ...