Acer Aspire SA60, Руководство по обслуживанию

Страница: 72 / 111

64 Chapter 4
12h Use walking 1’s algorithm to check out interface in CMOS cir-
cuitry. Also set real-time clock power status, and then check for
override.
13h Reserved
14h Program chipset default values into chipset. Chipset default val-
ues are MODBINable by OEM customers.
15h Reserved
16h Initial onboard clock generator if Early_Init_Onboard_Generator
is defined. See also POST 26h.
17h Reserved
18h Detect CPU information including brand, SMI type (Cyrix or
Intel) and CPU level (586 or 686).
19h Reserved
1Ah Reserved
1Bh Initial interrupts vector table. If no special specified, all H/W
interrupts are directed to SPURIOUS_INT_HDLR & S/W inter-
rupts to SPURIOUS_soft_HDLR.
1Ch Reserved
1Dh Initial EARLY_PM_INIT switch
1Eh Reserved
1Fh Load keyboard matrix (notebook platform)
20h Reserved
21h HPM Initialization (notebook platform)
22h Reserved
23h 1. Check validity of RTC value:
e.g. a value of 5Ah is an invalid value for RTC minute.
2. Load CMOS settings into BIOS stack. If Smos checksum
fails, use default value instead.
24h Prepare BIOS resource map for PCI & PnP use. If ESCD is
valid, take into consideration of the ESCD’s legacy information.
25h Early PCI Initialization:
• Enumerate PCI bus number
• Assign memory & I/O resource
• Search for a valid VGA device & VGA BIOS, and put it into
C000:0
26h 1. If Early_Init_Onboard_Generator is not defined Onboard
clock generator initialization. Disable respective clock
resource to empty PCI & DIMM slots.
2. Init onboard PWM
3. Init onboard H/W monitor devices
27h Initialize INT 09 buffer
28h Reserved
29h 1. Program CPU internal MTRR (P6 & PII) for 0-640K mem-
ory address.
2. Initialize the APIC for Pentium class CPU
3. Program early chipset according to CMOS setup. Example:
onboard IDE controller.
4. Measure CPU speed.
Checkpoint Description