67 Altos G5450 Installation Configuration Guide
# rpm –ivh nvlan-rhel4.4-0.60-1.21.x86_64.rpm
VGA Driver Installation (onboard XGI Z9s)
1.
You can find the onboard XGI Z9s VGA driver in EasyBUILD 7.1 build 600.
Please refer to Directory on EasyBUILD in Driver Required section and
copy the driver from the EasyBUILD 7.1 build 600 to HDD first.
# mount /media/cdrom
# cp /media/cdrom/Disk/g5450/onboard/xgiz9s/x64/rhel4ud4/
xgi_xf86_4.4.0-1.02.53-1.x86_64
.rpm
/tmp
2.
Install the driver
# cd /tmp/
# rpm –ivh
xgi_xf86_4.4.0-1.02.53-1.x86_64
.rpm
VGA Driver Installation (onboard ATI FrireGL V5200)
1.
Please copy the ATI driver installer to HDD.
2.
Go to the directory that includes the ATI driver installer and run the ATI
driver installer
# ./ati-driver-installer-8.35.5-x86.x86_64.run
3.
Follow the instructions and use the default settings to install the driver.
4.
After the driver is installed, run “aticonfig --initial” to configure the
driver.
# aticonfig –initial
Uninitialised file found. Configuring.
Using /etc/X11/xorg.conf
5.
Please reboot the system.
6.
If you want to change the display setting, please DO NOT use the OS
built-in utility. Please use the ATI Catalyst Control Center instead. You can
find the ATI Catalyst Control Center from Application -> ATI Catalyst
Control Center.
RAID Utility Installation
1.
You can find the MegaRAID Storage Manager for MegaRAID SAS 8708ELP
in EasyBUILD 7.1 build 600. Please refer to Directory on EasyBUILD in
Software Required section for the utility and copy it from the EasyBUILD
7.1 build 600 to HDD first.
# mount /media/cdrom
# cp –R /media/cdrom/
app/g5450/sas/8708ELP/Linux/. /tmp
2.
Install MegaRAID Storage Manager