![background image](http://html.mh-extra.com/html/acer/acerpower-m36/acerpower-m36_service-manual_5760042.webp)
36
Chapter 2
PnP/ PCI Configurations
The following table describes the parameters found in this menu. Settings in
boldface
are the default and
suggested settings.
Parameter
Description
Options
Primary Graphics Adapter
This item helps you select which graphics
controller to use as the primary boot device.
PCIE/IGD
PCI
Allocate IRQ to PCI VGA
If this item is enabled, an IRQ will be assigned
to the PCI VGA graphics system.
Enabled
Disabled
PCI IDE BusMaster
This item enables or disables the DMA under
DOS mode.
Enabled
Disabled
CMOS Setup Utility- Copyright (C) 1985-2006, American Megatrends, Inc.
PnP/PCI Configuration
PCI IDE BusMaster Enabled
Help Item
Primary Graphics Adapter PCIE/IGD
Allocate IRQ to PCI VGA Enabled
F1:General Help F7: Optimized Defaults
KLIJ
:Move Enter: Select +/-/ :Value F10:Save ESC:Exit