Chapter 2
27
Standard CMOS Features
Select Standard CMOS Features from the main menu to configure some basic parameters in your system.
The following screen shows the Standard CMOS Features menu:
The following table describes the parameters found in this menu. Settings in
boldface
are the default and
suggested settings.
Parameter
Description
Options
Date
Lets you set the date following the weekday-
month-day-year format
Weekday: Sun, Mon...Sat
Month: Jan., Feb...Dec.
Day: 1 to 31
Year: 1999 to 2098
Time
Lets you set the time following the hour-minute-
second format
Hour: 0 to 23
Minute: 0 to 59
Second: 0 to 59
Primary/Secondary IDE Master/
Slave/
Leave this item at Auto to enable the system to
automatically detect and configure
IDE devices
on the channel. If it fails to find a device, change
the value to Manual and then manually configure
the drive by entering the characteristics of the
drive in the items described below.
IDE Device Model Number:
Not Detected
S-ATA1/S-ATA2
These items display the status of auto detection
of S-ATA Devices when “Onboard SATA-IDE”
sets to “IDE”
Not Detected
Hard Disk
Drive A
Allows you to configure your floppy drive A.
None
360 KB, 5.25-inch
1.2 MB, 5.25-inch
720 KB, 3.5-inch
1.44M, 3.5 - inch
2.88 MB, 3.5-inch
X
S-ATA 2 Hard Disk
KLIJ
:Move Enter: Select +/-/ :Value F10:Save ESC:Exit
System Date Wed 12/28/2005
X
Primary IDE Master [Not Detected]
Floppy A
1.44 MB 3
1
/
2
"
Total Memory Size
Size : 1024MB
CMOS Setup Utility- Copyright (C) 1985-2006, American Megatrends, Inc.
Standard CMOS Features
X
Secondary IDE Slave CD/DVD ROM
X
S-ATA 1 Hard Disk
X
Primary IDE Slave [Not Detected]
X
Secondary IDE Master CD/DVD ROM
F1:General Help F7:Optimized Defaults
Help Item
Use [ENTER], [TAB]
or [SHIFT-TAB] to
select a field
Use [+] or [-] to
configure system Date
System Time 01:57:20
