Acer A221HQV Скачать руководство пользователя

Страница: 3 / 88

Go to contents page

Product Announcement:

This product is certificated to meet RoHS Directive and

Lead-Free produced definition. Using approved critical

components only is recommended when the situation

to replace defective parts. Vender assumes no liability

express or implied, arising out of any unauthorized

modification of design or replacing non-RoHS parts.

Service providers assume all liability.

Qualified Repairability:

Proper service and repair is important to the safe,

reliable operation of all series products. The service

providers recommended by vender should being

aware of notices listed in this service manual in order

to minimize the risk of personal injury when perform

service procedures. Furthermore, the possible existed

improper repairing method may damage equipment or

products. It is recommended that service engineers

should have repairing knowledge, experience, as well

as appropriate product training per new model before

performing the service procedures.

NOTICE:

To avoid electrical shocks, the products should be

connect to an authorized power cord, and turn off the

master power switch each time before removing the

AC power cord.

To prevent the product away from water or explosed

in extremely high humility environment.

To ensure the continued reliability of this product,

use only original manufacturer’s specified parts.

To ensure following safety repairing behavior, put the

replaced part on the components side of PWBA, not

solder side.

To ensure using a proper screwdriver, follow the

torque and force listed in assembly and disassembly

procedures to screw and unscrew screws.

Using Lead-Free solder to well mounted the parts.

The fusion point of Lead-Free solder requested in the

degree of 220

Important Safety Notice

ACER A211H/A221HQ

Содержание A221HQV

























































































Результаты поиска

Содержание A221HQV

Отзывы:

Похожие инструкции для A221HQV

Бренды по названию

Популярные бренды

Acer A221HQV, Руководство по обслуживанию

Результаты поиска

Содержание A221HQV

Отзывы:

Похожие инструкции для A221HQV

Бренды по названию

Популярные бренды