Acer A221HQV, Руководство по обслуживанию

Страница: 40 / 88

5. Troubleshooting (continued)
5.2.4 Abnormal screen
5.2.4.1 Abnormal screen for VGA source
OK
NG
Failure Point
1) No R, G, B video signals output from
host computer, check computer.
2) VGA video signal cable disconnection.
Failure Point
In the case of the Red signal. (Green and Blue
signal is the same path, too.)
1) Printed wire broke between CN302 pin 1 and
I310 pin 30.
2) Video cable is failure.
3) L303, R313, R314 are open.
4) R315 is short.
5) C316, C318 is short or open.
NG
OK
Failure Point
1) Printed wire broke between I310 and CN306.
2) LVDS wire failure.
NG
OK
Proceed "Checking the resolution change IC
movement" section.
NG
OK
Failure Point
1) Printed wire broke between I306 and P302.
2) L306, R327, R328 are open.
3) R329, R330 if is 2.2K ohm.
4) D305, D306, C330, C331 are short.
5) Video cable is failure.
Check the R, G, B video
signal from computer input on CN302
of video connector.
Check the R, G, B input
video signals on I310 pin 25, 27, 30
respectively that their level is 0.5 to 1.0
Vp-p.
Check the H, V SYNC input signals on
I310 pin 21, 22 respectively that signal
and level.
Check all LVDS signals being output
to CN306 from I310?
38
Go to contents page
ACER A211H/A221HQ