Troubleshooting
Problem
Possible Cause
Solution
The air conditioner
will not start
The air conditioner
does not cool as it
should
The air conditioner is
unplugged
Make sure the air conditioner plug is
pushed completely into the outlet.
Check the house fuse/circuit breaker
box and replace the fuse or reset the
breaker.
Make sure there are no curtains,
blinds or furniture blocking the
front of the air conditioner
Lower the set thermostat
temperature.
Clean the filter. Refer to CLEANING
& MAINTENANCE.
Please allow time for the room to
cool down after turning on the air
conditioner.
Check for open furnace registers
and cold air returns.
The fuse is blown / circuit
breaker is tripped
Power failure
The current interrupter
device is tripped
Air flow is restricted
The temperature control
may not be set correctly.
The air filter is dirty
The room may be too
warm
Cold air is escaping
The unit will automatically restart
when power is restored.
There is a protective time delay
(approx. 3 minutes) to prevent
tripping of the compressor overload.
For this reason, the unit may not
start normal cooling for 3 minutes
after it is turned back on.
Press the RESET button located on
the power cord plug.
If the RESET button will not stay
engaged, discontinue use of the
air conditioner and contact a
qualified service technician.
Your home in sync
29
