Timer
Button (On
Remote
Control)
Eco Mode
Button (On
Remote
Control)
Sleep
Mode
Button (On
Remote
Control)
LED
Display
Button (On
Remote
Control)
When the air conditioner is on standby/running, press the
Timer button and its icon will flash on the remote display.
During the flashing process, press + or - to select a timer
from 0.5 to 24 hours, then press the Timer button again to
confirm the setting. After the timer ends, the air conditioner
will start/stop running automatically.
Turning the air conditioner ON or OFF at any time or adjusting
the timer setting to 0.0 hour will cancel the timer program.
In Eco mode, when the desired temperature is reached, the
compressor will turn off and the fan will continue to run for
3 minutes. Then the fan cycles on for 1 minutes at 5 minute
intervals until the room temperature is above the set tempe-
rature, at which time the compressor turns back on and cooling
restarts.
In Sleep mode, the air conditioning temperature will adjust
gradually every 30 minutes to keep you comfortable while
preventing overcooling. After 10 hours, Sleep mode will exit
automatically and the temperature will return to the initial
temperature.
NOTE:
In Sleep mode, all the button sounds will be muted, and
all the indicators on the display will turn off after 15 seconds,
except for the Sleep mode indicator.
Long press 5 seconds to turn on or off MUTE mode.
When the running time of the fan reaches 500 hours, the filter reminder will light up to
remind you to clean the filter. To clean the filter, see page below.
Turn on or off the display on the air conditioner.
Long press 5 seconds to switch between °F/°C.
Other Features
Filter Reminder
Your home in sync
24
