ēKo Pro Series User’s Manual
Page
65
Doc. # 7430-0710-01 Rev. C
When done, click on
OK
button. If the Start date chosen is in the past you, it could several
minutes to complete calculations and you will receive the message below. Click on “
Yes
”
if you want to proceed.
The newly created calculation should now appear in the “Manage Calculations” list. These
calculations will now show up as a sensor measurement with each of the associated nodes. They
can also be displayed or plotted as any sensor measurements.
Edit an existing calculation:
To edit an existing calculation, highlight the calculation you wish to edit and click on the “
Edit
”
button at the bottom of the page and the ”Edit Calculation” dialog window will appear. You can
edit the parameters that you want to change. When done, click on the “
OK
” button.
