background image

__________________________________________________________________________________ 

Superdryer 62 Owner’s Manual 

 

2

 

 

 

 

 

 

 

 

 

 

 

 

       

 

Safety Notes: 

 

The Superdryer Series Dehumidifier must always be connected using the grounded 

electrical connection as required from all electrical appliances.  The warranty is voided 

and all responsibility for the operation is born by the owner if non-grounded wiring is 
utilized. 

 

The Superdryer Dehumidifiers must only be maintained and serviced by a qualified 
technician. 

 

The Superdryer Dehumidifiers are designed to be transported and operated in the 

vertical position.  Any other orientation could cause water to come in contact with the 
electrical components.  Remove plug before moving dehumidifier.  If any water may 

have spread throughout unit, the unit should be opened and allowed to dry thoroughly 
before reconnected to electric and restarting. 

 

For proper operation, neither the inlet nor discharge should be positioned against a 

wall.  The inlet requires a minimum of 12” clearance and the discharge needs a 
minimum of 48”

 

clearance.   

 

If the unit is utilized in a narrow room, the unit should be positioned so that the inlet 
and discharge are facing the longest straight runs. 

 

Do not insert any objects into the inlet or discharge.  If service is required, call a 

qualified technician.  All work on unit should be done with the unit “off” and 
unplugged. 

 

Do not use water to clean unit exterior.  Only use a damp cloth with unit unplugged. 

 

Do not use unit as shelf or device to hang clothes.  This could cause damage to unit. 

 

The inlet filter generally needs cleaned once per month.  Check unit on a weekly basis 

to insure that more frequent cleaning is not required. 

 

Pertinent Technical Standards and Regulations: 

The Superdryer dehumidifier has been designed and manufactured to all the following 

European Standards (Norms) and Regulations: 

 

 

MACHINES NORMS (D.P.R., NR. 459 - 24

th 

July 1996) ; 

 

SECURITY REGULATIONS FOR LOW TENSION APPLIANCES 2006/95/CE); 

 

ELECTROMAGNETIC COMPATIBILITY (EMC) – 2004/108/CE. 

 

It is hereby certified that this Dehumidifier

 

conform to the: 

 

IEC Regulations CEI-EN 60335-2-40, CEI-EN 55014-1, 55014-2. 

 

The machine is built according to RoHS European Norms

 

Содержание Superdryer 62









Отзывы: