Acdeos AR FL 210-8/2, Руководство пользователя

Страница: 24 / 38

AXS – Ramp Manual
AXS FL RAMP Manual rev 1 23
Before using the ramp: The ramp should always be tested after installation.
Follow the following instructions checked
MOUNTING
– Check that all bolts on the
ramp are in place and tightened. Check that
the MAX load stickers are on the ramp
MOUNTING
– Unfold the ramp and load it
with the max load as indicated at the ramp
or approx 4-5 people. Check that the fixing &
fitting of the ramp is strong enough for this
weight.
The lock roller can be adjusted in the slot
hole.
Swing the ramp to the outside position and
then swing it back into the vehicle. When
closing the ramp it should pass easily back
over the vehicle floor. If there is too much
collision with the floor you need more pre-
load on the hook. The roller needs
adjustment in direction of the arrow.
Left or right version mirrored
OPERATION
– Move the ramp in and out to
check that all moving parts are running
freely.
Check that the ramp closes properly into
the auto lock
The black nylon roll is eccentrically and can
be adjusted if the ramp lock is to loose.
A loose lock will give a rattling noise.
If this small test procedure is followed with success the ramp is ready to be used. If one of the steps is
failed please resolve the problem before putting the ramp in to service use.