![background image](http://html1.mh-extra.com/html/acd/m260se/m260se_manual_3859066013.webp)
M260SE_Brief_Overview_FCC_V1.00_en_es.docx
13 / 33
4
Cleaning and Maintenance Information
Turn off the device before starting any cleaning or maintenance
process!
ATTENTION
Do not use any corrosive chemicals, cleaning solutions or strong
cleaning agents in order to clean the device.
ATTENTION
All components must be disposed of properly at the end of their
technical lifetime.
Clean the device when dirty and by placing it firmly onto a surface (e.g. table). This ensures a secure hold
and the device cannot slip out of your hand during the cleaning process.
4.1 Display
Clean the display with a soft, dry cloth. In order to do, always switch off the device as the display responds to
all contact and could therefore compromise or interfere with the active program. Do not apply any severe
pressure on the display.
4.2 Charging and Communication Contacts
If transfer problems occur, clean the charging and communication contacts with a soft, moist cloth.
When dealing with the DS260, the power plug must be disconnected beforehand.