M260SE_Brief_Overview_FCC_V1.00_en_es.docx
8 / 33
3.2.1 Charging the Power Supply Unit for the DS260 & M260SE
The M260SE and the spare battery may only be charged in the DS260 docking station with the respective
power supply unit.
External power supply unit for DS260
Input voltage
~
100
– 240 V AC; 0.8 A; 50 – 60 Hz
Output voltage
15 V DC; 2.4 A
Power cable (country-specific)
ATTENTION
Unintended use of the interfaces should be avoided.
3.2.2 Replacing the battery in the Handheld Terminal M260SE
The battery compartment is located on the rear of the device. In order to remove the battery, first remove the
transverse hand strap by simply unhooking it. Now push the locking tab on the battery towards the battery
surface (Figure 3.). The battery can now be removed from the tab.
The battery can easily be inserted. In doing so, ensure that you insert the battery at a slight incline towards
the contacts and hook it on the fixing tab whilst doing so. Then close the locking mechanism with a slight
amount of pressure.
Figure 3: Inserting the Battery
