M210SE_Set_Kurzübersicht_Brief_Overview_V1.09_de_en (3)
29 / 33
16 Mobile terminal expansion options
16.1 1D scanner
A 1D scanner is available as an optional accessory for the mobile terminal. The scanner is located under the
disc at the top of the housing. The integrated hardware allows for various energy-saving modes.
ACD Elektronik GmbH has developed a scanner driver for controlling the scan module. The program as well
as detailed documentation and development files are available from ACD Elektronik GmbH.
The following table contains the typical reading distances of the 1D scanner:
Barcode size
Min. distance
Max. distance
5.0 mil
Approx. 5,6 cm
Approx. 12,7 cm
7.5 mil
Approx. 4,6 cm
Approx. 19,1 cm
10 mil
Approx. 5,1 cm
Approx. 24,6 cm
20 mil
*
Approx. 38,1 cm
40 mil
*
Approx. 55,9 cm
55 mil
*
Approx. 73,7 cm
* Not specified as the minimum distances are highly dependent on the width of the barcode and the scanning
angle.
16.2 2D scanner
A 2D scanner is available as an optional accessory for the mobile terminal. The scanner is located under the
disc at the top of the housing. The integrated hardware allows for various energy-saving modes.
ACD Elektronik GmbH has developed a scanner driver for controlling the scan module. The program as well
as detailed documentation and development files are available from ACD Elektronik GmbH.
The following table contains the typical reading distances of the 2D scanner:
Barcode size
Min. distance
Max. distance
5,0 mil
Approx. 5,3 cm
Approx. 19,0 cm
7,5 mil
*
Approx. 26,9 cm
10 mil
*
Approx. 25,7 cm
20 mil
*
Approx. 62,7 cm
* Not specified as the minimum distances are highly dependent on the width of the barcode and the scanning
angle.
16.3 Camera
A 5 MP camera with illumination is installed on the rear of the mobile terminal.
16.4 WLAN
WLAN in accordance with IEEE 802.11a/b/g/n can be optionally integrated in the mobile terminal.
WLAN Security (standard encodings are ACD-validated)
WEP, WPA, IEEE802.11i, WPA2, WPA2-PSK, 802.1x: authentication
