M210SE_Set_Kurzübersicht_Brief_Overview_V1.09_de_en (3)
27 / 33
15.2 Docking station
15.2.1 Power supply unit
The M210SE and the spare battery may only be charged in the DS210 docking station with the
corresponding power supply unit.
External power supply unit for DS210
o
Input voltage
~
100
– 240 V AC; 1.0 A max.; 50 – 60 Hz
o
Output voltage
15 V DC; 2.4 A
Power cable (country-specific)
15.2.2 Interfaces
The DS210 docking station interfaces are described below. They are located at the rear.
Fig. 9: DS210 interfaces
The connections are described from left to right:
The DC plug of the power supply unit is inserted into the
DC socket
to supply power.
The
RJ45 port
is the
Ethernet interface
(10/100 Mbit). The docking station can be connected to a LAN
here. If required, an Ethernet cable can be purchased from ACD Elektronik GmbH as an optional
accessory.
The
USB port (type B)
is assigned according to the USB standard. A conventional USB cable can be
connected to the port. If required, a USB A/B cable can be purchased from ACD Elektronik GmbH as an
optional accessory.
The
USB port (type A)
is assigned according to the USB standard. A conventional USB cable or
memory stick can be connected to the port depending on the application. If required, a USB A/B cable
can be purchased from ACD Elektronik GmbH as an optional accessory.
15.2.3 Status LEDs
The status LEDs belonging to the DS210 docking station for the mobile terminal and the spare battery are
described below.
The power LED is green:
The docking station is supplied with current via the power supply unit.
The connect-LED blinks green:
There is a data transfer via Ethernet.
Fig.10: DS210 status LEDs
Anschluss
Netzteil
(DC-Buchse)
RJ45/Ethernet
USB B
USB A
