32
11.3.2 Freezer movement condition
The freezer output1(REF.1)
:Starts from the controller starts, the output contact has maintained at
“ON” condition.
The freezer strives .2(REF.2)
: After freezer .1 output contacts “ON”, the freezer temperature's PV
value is equal to when or is smaller than “REF.2 the movement temperature SV value”, the
freezer .2 output contacts have maintained at “ON” condition.
Note 1: “REF.1 starts again prevents the time” works, freezer 1 output contacts “OFF”.
Note 2: “The REF 2 delay time” works, freezer 2 output contacts “OFF”.
Note 3: The execution defrosts (DEFROST) movement time, the freezer 1 outputs and the freezer
2 output contacts all maintain at “ON” condition.
11.3.3 Defrosts when freezer's movement condition: Start/stop choice
This function is when refers to carries on defrosts the movement, setup of the freezer whether
revolution.
1. Choice [start]: Defrosts when the freezer maintains at the movement condition.
2. Choice [stop]: Defrosts when the freezer stops the movement, after treating defrosts finishes,
started again.
