ACCURAT GUARD 1000, Инструкция по эксплуатации

Страница: 27 / 56

27
1. Ethernet Port;
2. USB Port: For firmware upgrade and search back the IP address;
3. S1 (Green): Running indicator, flash is normal;
4. S2 (Green): SNMP running indicator, flash is normal, flash frequency is determined
by SNMP inquire cycle;
5. The S3 (Red) device status indicator has two modes. If the indicator is constantly
on, it means that the device is successfully connected to the UPS and data
communication is enabled. However, if the status indicator is flashing, it means that
the device is disconnected or UPS communication has failed;
6. Default: Factory default switch.
Only for LOG SNMP GUARD Series
5
3
2 6
4
1
The SNMP card, or the remote management card, adopts Simple Network
Management Protocol (SNMP) which is an Internet Standard protocol for collecting
and organizing information about managed devices over IP networks. Connect
your computer to the UPS to monitor its working status and access the software
application. You can find the SNMP card manual on our website:
accurat-energy.com/support/log