www.accuenergy.com
59
V: 1.0 Revised: Sept. 2019
Chapter 10: Web Interface Readings and Parameter Settings
Post Channel 1 Enable: Enable the Post Channel 1 in order to configure the settings
needed to post data via the HTTP(S)/FTP post functions
Post Method: Select the method for posting the files, the user can choose HTTP/
HTTPS or FTP
Post Name Fixed: This configuration needs to be enabled in order for user to control
the name of the file that will be posted. Otherwise file name will be based on the Log
File Name Format configuration from the Data Log settings
Post File Name: Users can enter a name for the file that will be posted as if 'Post
Name Fixed' is enabled
If the HTTP/HTTPs post method is selected:
HTTP/HTTPS URL: Enter the URL for the HTTP/HTTPS server. The URL needs to begin
with the prefix http:// or (https://)
HTTP/HTTPS Port: Enter the port number the server will be listening on
HTTP/HTTPS Meter ID: Enter a name or description for the meter to be identified
on the server
If the FTP post method is selected:
FTP URL: Enter the URL for the FTP server. The URL needs to begin with the prefix
ftp://
FTP Port: Enter the port number the server will be listening on
FTP Username: Enter the username required to log into the FTP server
FTP Password: Enter the password required to log into the FTP server
NOTE: The 'TEST Post Channel' button should only be utilized after clicking the
'Save' button otherwise a fail response will be observed. If a fail response occurs after
clicking 'Save' confirm the network settings or credentials for the server.
