Acuvim-L Series : L-WEB User manual
www.accuenergy.com
V: 1.0 Revised: Sept. 2019
16
• Press 'P' to get to 'N7', this is the Modbus Port setting.
• Press 'V/A' to enter edit mode and configure the Modbus Port. The cursor of the first digit
will begin to flash.
• Press the 'H' button to scroll through the digits.
• Press the 'P' or 'E' to change the value of the flashing cursor.
• Once the Modbus port setting is configured press 'V/A' to confirm.
• Press 'P' to get to 'N8', this is the network reset setting. After making any changes to the NET
settings (N1-N7), users must reboot the Ethernet module from this page for the settings to
take effect.
• To perform the reboot press 'V/A' to enter edit mode, the cursor will begin to flash.
• Press the 'P' or 'E' button to change the setting to 'Reset' and press 'V/A' to confirm to
reset.
• The cursor will return to 'No' once successful.
