Accu-Steam GG24A Скачать руководство пользователя

Страница: 39 / 56

Accu-Steam™ Gas G2 Installation and Operators Manual

MP5017-1702

PAGE 32

OPERATION

FIRST STEP

It is recommended that you clean your

ACCU-STEAM™ griddle thoroughly before using

it for the first time. To clean the appliance cooking

surface, just simply wash it down with a solution

of mild soap and water, then rinse thoroughly with

clean water and wipe dry with a clean towel.

SEASONING

Once the cooking surface has been cleaned, turn

the appliance on via the digital control key pad

and set the temperature to 200°F. (93°C), and

allow the griddle cooking surface to heat for 10

minutes. Using a high temperature oil, such as

Pan and Grill Shortening™, Whirl™ or equivalent,

pour enough to cover the entire appliance

cooking surface. Do not use standard vegetable

oil to season the griddle cooking surface. It

may cause food to stick and result in improperly

cooked food. Work this seasoning oil into the

griddle surface with a regular heavy-duty scrub

pad for about 5 minutes, making sure that you

scrub the seasoning oil over the entire appliance

cooking surface. After the entire cooking surface

has been scrubbed with seasoning oil for 5

minutes, simply wipe or squeegee off excess

oil from cooking surface. Your appliance is now

ready to use!
If you use chemicals to clean your griddle

periodically or on a schedule, you may need

to repeat this process after the use of these

chemicals.

PREHEATING

Press the

ON/OFF

and set the desired

temperature. The griddle will increase its surface

temperature at an average rate of 15° F (8°C)

per minute. It takes approximately 25 minutes

to raise the griddle from room temperature to

its maximum temperature of 400° F (204°C).

The appliance will be preheated when the

selected set temperature is displayed and the

corresponding LED goes solid. Please use

caution as temperatures on and around the

griddle cooking surface could cause severe

burns.

COOKING

Begin cooking only after the appliance has been

preheated to the desired temperature. Please

note these facts:

• You can cook all the way to the edges of the

cooking surface because the temperature

does not very across the entire cooking

surface.

• You can turn the product to the same spot

because the cooking surface has near

instant heat recovery.

• It will always cook the same, regardless of

product load or surface coverage.

Accurate Cooking Temperatures

Because of the inaccurate surface temperatures

and long recovery times common with other

griddles cooking surfaces. It is doubtful you were

cooking at the set temperature or the temperature

you wanted. Adjust the temperature on the

Accu-Steam ™griddle and it will not change or

vary by the location on the griddle surface. There

are no hot or cold zones.

Checking Surface Temperatures

The digital temperature control and temperature

sensor are more accurate than any other device

to measure the cooking surface temperature in

this appliance. Any other digital device may show

a difference. The important use of the external

temperature measuring device is to ascertain that

the temperatures are within ±5°F across the entire

cooking surface of the appliance.
Due to the construction material of the cooking

surface an infrared temperature probe can’t be

used.
The proper measurement tools to use is a

calibrated weighted temperature probe and digital

temperature meter set. (See Fig. 9)

Please use caution as temperatures on and

around the griddle cooking surface could cause

severe burns.

WARNING

Содержание GG24A

























































Результаты поиска

Содержание GG24A

Отзывы:

Похожие инструкции для GG24A

Бренды по названию

Популярные бренды

Accu-Steam GG24A, Инструкция по установке и эксплуатации

Результаты поиска

Содержание GG24A

Отзывы:

Похожие инструкции для GG24A

Бренды по названию

Популярные бренды