Accu-Steam GG24A, Инструкция по установке и эксплуатации

Страница: 12 / 56

Accu-Steam™ Gas G2 Installation and Operators Manual
MP5017-1702
PAGE 7
Improper installation, adjustment, alteration,
service or maintenance can cause property
damage, injury or death. Read the installation,
operating and maintenance instructions
thoroughly before installing or servicing the
equipment.
To Prevent Electrical Shock, do not open
access panel. There are no usable-
serviceable parts inside. Request servicing
from a qualified service personnel.
A five minute complete shutoff must be
observed before the appliance is relighted.
Intended for other than household use.
Plug the appliance into a properly grounded
electrical outlet of the correct voltage, size
and plug configuration. If they do not match,
contact a qualified electrician to determine
the proper voltage and size and install the
proper electrical outlet.
Do not connect to a circuit operating more
than 150V to ground
To avoid any personal injury or damage
to the unit do not pull the appliance by the
power cord.
To prevent any injury, discontinue any use if
power cord is frayed or worn.
To prevent any injury or damage this
commercial appliance must be installed by a
qualified electrician.
To avoid any injury, turn the power off, unplug
from the power source and allow to cool
before performing any maintenance.
To avoid electrical shock or personal injury,
do not steam clean or use excessive water
on this commercial appliance.
This product has no “user” serviceable parts.
To avoid injury or damage to the commercial
appliance use only Authorized AccuTemp
Service Agents and Genuine Replacement
Parts when service is required.
Genuine AccuTemp Replacement Parts
are specified to operate safely in the
environments in which they are used. Some
aftermarket parts or generic replacements
parts do not have the same specifications to
operate safely in AccuTemp equipment. It is
imperative that to use Genuine AccuTemp
Replacement Parts to avoid injury or damage
to the commercial appliance.
Always disconnect from power source before
cleaning or servicing.
Any infield modification that bypass the built-
in safety features will result in personal injury
or death.
This appliance must be properly grounded,
in accordance with all National, State or local
electrical codes.
This appliance has a totally unique design
and is constructed unlike any other griddle
on the market today. Any modification may
permanently damage the appliance.
This appliance must be level for proper
operation and to reduce possible damage to
this commercial appliance.
This appliance is heavy, for safe handling,
the installer should obtain help as needed
or employ appropriate material handling
equipment to remove the commercial
appliance from the skid and move to the final
location in the building.
Temperatures in and around the appliance
are very hot and can cause severe burns.
To avoid damage to the cooking surface of
IMPORTANT SAFETY INSTRUCTIONS
IMPORTANT: Read the following safety installation to avoid personal injury or death and to avoid
damage to the equipment or property
WARNINGS