Accu-Sort AXIOM 400, Руководство по эксплуатации продукта

Страница: 54 / 132

4-12
Electrical Installation
AXIOM™ 400 Product Manual
Accu-Sort Systems, inc. 04-AXIOM400-Electrical_Installation_R10.doc
Tachometer Connections
In applications where product tracking is required, a tachometer is typically
used. Connect the tachometer wiring to the wiring base terminal blocks.
(See Figure 4-9.)
Figure 4-9
: Wiring Tachometer Input to Axiom Wiring Base
When a tachometer is required, Accu-Sort tachometer (PN 1000019875) is
recommended. Wire this tachometer as indicated in shaded area of Table 4-3.
(Wire colors indicated for standard NPN Output, shown in shaded areas.)
Table 4-3 : Tachometer Wiring
TACH WIRE COLOR TERM NPN OUTPUT PNP OUTPUT 24V
WHT/ORG
V + Supply Voltage Supply Voltage
(Jumper to V+)
TACH + Jumper to V+ Tach Output + Output
WHT/BLU
TACH - Tach Output Jumper to GND - Output
BLU/WHT+ORG/WHT
GND Common Common
The shielding for the tachometer wiring MUST be terminated to earth ground.
(See Figure 4-10.) Otherwise, belt static could result in a system failure.
Figure 4-10 :
Tachometer Shielding Terminated to Earth Ground
If your application uses a tachometer other than the one available from Accu-
Sort, follow the TACH wiring table to assure proper wiring.
Multiple Readers When an application incorporates multiple readers wire
the tachometer to the Axiom Controller. (Reference drawings 107480 and
107481 in Appendix D.)