Accu-Scope EXI-410 Series, Руководство пользователя

Страница: 6 / 31

EXI-410 INVERTED MICROSCOPE SERIES
ACCU-SCOPE ®
73 Mall Drive, Commack, NY 11725 • 631-864-1000 • www.accu-scope.com 5
INTRODUCTION
Congratulations on the purchase of your new ACCU-SCOPE ® microscope. ACCU-SCOPE ®
microscopes are engineered and manufactured to the highest quality standards. Your microscope will
last a lifetime if used and maintained properly. ACCU-SCOPE ® microscopes are carefully assembled,
inspected and tested by our staff of trained technicians in our New York facility. Careful quality control
procedures ensure each microscope is of the highest quality prior to shipment.
UNPACKING AND COMPONENTS
Your microscope arrived packed in a molded shipping carton. Do not discard the carton : the carton
should be retained for reshipment of your microscope if needed. Avoid placing the microscope in dusty
surroundings or in high temperature or humid areas as mold and mildew will form. Carefully remove the
microscope from the EPE foam container by its arm and base and place the microscope on a flat,
vibration-free surface. Check the components against the following standard configuration list:
1. Stand, which includes the supporting arm, focusing mechanism, nosepiece, mechanical stage
(optional), condenser with iris diaphragm, illumination system, and phase contrast accessories
(optional).
2. Binocular viewing head
3. Eyepieces as ordered
4. Objectives as ordered
5. Stage plate inserts, green and yellow filters (optional)
6. Dust cover
7. 3-prong electric power cord
8. Camera adapters (optional)
9. Fluorescence filter cubes (optional)
Optional accessories such as optional objectives and/or eyepieces, slides sets, etc., are not shipped as
part of the standard equipment. These items, if ordered, are shipped separately.