44
4. Locate the infrared (IR) window on the top of the meter.
5. Locate the IR window on either the infrared cable (computer) or PDA.
6. Put the meter on a flat surface. Point the two IR windows toward each other.
They should be 3–10 cm apart.
7. Do not move the infrared cable (computer), PDA, or meter during the
transfer.
8. Follow the prompts on the software.
9. The software program may shut off the meter automatically when the data
transfer is complete.
Infrared (IR) Window
Notes:
If the data did not transfer successfully, try again. Contact Roche if problems persist.
•
Be sure to set the time and date in the meter for traceability of results.
•