36
Farbe: PMS 583 – Prüfmittelnummer: 208
37
3
Basic settings
You may now move to the SET menu to turn the beep tone on or off, to
set the year, time and date, and to define the time and date format.
When you turn on your Accu-Chek Integra meter for the first time, it has
the following settings (which you can change):
Beep tone: on
Year: 2000
Display format for the time and the date:
24 h (with the accompanying date format day-month/DD-MM)
Time: 00:00
Date: 0-0
If you do not set the time and date, a series of zeros will be displayed in
place of time and date when you take a reading.
In that case, statistical evaluations (in the electronic notebook, see
Chapter 5 “Using the Accu-Chek Integra meter as an electronic note-
book”) cannot be performed as they can only use data stored together
with the time and date. To distinguish readings internally (in memory),
they are numbered consecutively.
The procedure for changing the settings is as follows:
Press the SET button to call up the SET menu.
The field currently flashing in the menu may now be changed.
Press the MEMO button to change the current setting.
Numerals such as the year, time and date can be incremented to a
certain value, then the count-up starts again from the beginning.
In the case of settings where you have two options, e.g. the beep
tone setting and the time/date format, pressing the MEMO button
presents each option in turn.
Press the SET button to save the chosen setting and move on to the
next setting.
You can change any setting you wish. Press the SET button repeat-
edly until the setting you wish to change is displayed flashing. A test
strip is not advanced.
You can close the set menu at any time by pressing the ON/OFF
button. All settings you have entered are saved and the meter turns
off.
i
Only
turn on the meter with the SET button when you intend to
change the settings.
If you turn on the meter with the ON/OFF button and there is a
drum in the meter, a test strip will be advanced.
