manualshive.com logo in svg

Accu-Chek Compact, Руководство пользователя

Поделиться
Скачать
Accu-Chek Compact Скачать руководство пользователя страница 13

21

Getting Started

20

Changing the Batteries

Your meter is shipped with two 1.5 volt (AAA) alkaline
batteries that need to be installed before testing. Battery
life will vary depending on usage, so always keep spares
on hand.

The meter saves battery power by automatically turning
off after five minutes of nonuse. When a blood sugar 
test is finished, the meter turns off automatically after 
60 seconds.

When battery power is low, the battery symbol      will
appear. This indicates that there is enough power to 
finish testing with the current test drum loaded in the
meter. When this test drum is empty, change the batter-
ies and the test drum at the same time.

When you replace the batteries, any blood sugar 

results you have in memory will be retained (together
with additional test information such as test date and
display messages).

Time and date will need to be reset when 

batteries are replaced.

When replacing batteries, always replace both at 

the same time and make sure both batteries are the
same brand.

361-11264 CMPCT Manual (Eng)  8/8/02  3:45 PM  Page 22

Содержание Compact





























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды