manualshive.com logo in svg

Accu-Chek Active GB, Руководство пользователя

Поделиться
Скачать
Accu-Chek Active GB Скачать руководство пользователя страница 31

30

Symbols and Troubleshooting

12

•  While the test was in progress, you 

connected the meter to a computer that 

was on.
Remove the USB cable and repeat the 

blood glucose test or control test with a 

new test strip.

•  The meter was exposed to a strong 

electromagnetic field.
Change your position or turn the source 

of electromagnetic radiation off.

•  The meter is exposed to too much light.

Go to a shaded place or shade the  

meter, for example with your body.

•  A meter error has occurred.

Repeat the blood glucose test or control 

test with a new test strip. If the error 

message appears again, the meter is 

defective. Contact customer support.

•  The ambient temperature or the meter 

temperature is too low or too high for a 

test.
Ensure that the ambient temperature is 

b8 and +42 °C and wait for  

the meter to adjust to that temperature.

FOM_09262946001_01_EN_ROW.indd   30

24.03.2020   09:49:51

Содержание Active GB





































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды