manualshive.com logo in svg

Accu-Chek Active GB, Руководство пользователя

Поделиться
Скачать
Accu-Chek Active GB Скачать руководство пользователя страница 17

16

Using the Meter as a Diary

5

Order of the averages

All test results / Test results marked with 

 / Test results marked with   

Press 

Press 

Press the S button to retrieve the averages 

in the order shown in the table. Press the M 

button to retrieve the averages in the 

reverse order.
If you press the S button repeatedly, the 14, 

30, and 90-day averages for all test results 

are displayed after the 7-day average for all 

test results.
If you continue to press the S button, the 

averages for “Before meal” and “After 

meal” are displayed in the same order. 

When the last average is displayed  

(= 90-day average marked with   ) and you 

press the S button again, the meter beeps. 
If you press and hold the M button or S 

button, the averages are displayed in quick 

succession.

No average

If there are no stored 

test results for the 

selected average, 

three dashes are 

displayed.

If you changed the date or time, performed 

a test, and then reset the date or time, the 

chronological order of the test results is 

interrupted. As the meter can only calculate 

averages based on test results in an 

uninterrupted chronological order, it 

therefore does not take into account test 

results prior to the interruption.

FOM_09262946001_01_EN_ROW.indd   16

24.03.2020   09:48:57

Содержание Active GB





































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды