13
Refer to the following table for obtaining the codes of the standard configurations of the various models (for selecting the
accessories, just set the corresponding variant to the desired value according to the TABLE FIELDS/VARIANTS described above):
Model
Description
Standard configuration
HPE
25
Capacity of 25 kW without injection
0110516#00000000000001
HPE
35
Capacity of 35 kW without injection
0110516#01000000000001
HPE
50
Capacity of 50 kW without injection
0110516#02000000000001
HPE
60
Capacity of 60 kW without injection
0110516#03000000000001
HPE
50F
Capacity of 50 kW, fixed and inverter compressors, without injection
0110516#04000000000001
HPE
70
Capacity of 70 kW, without injection
0110516#05000000000001
HPE
-LT 25
Capacity of 25 kW, with injection
0110516#00010000000001
HPE
-LT 35
Capacity of 35 kW, with injection
0110516#01010000000001
HPE
-LT 50
Capacity of 50 kW, with injection
0110516#02010000000001
Name of factory-fitted accessories:
Field
Variant
Description
Name
CI
1
High efficiency integrated circulator
CI1
CI
2
Shut-off valve
CI2
CI
3
High efficiency auto-adaptive integrated circulator
CI3
CI
6
AC inverter pump
CI6
KA
1
Antifreeze kit
KA
GI
1
Management plant module
GI
SIL
1
Silencing
SL
SIL
2
Super silencing
SSL
TR
2
Heat exchanger treatment finguard with
TR2
AC1
1
Switch magnetermic
7
INSTALLATION
WARNING: All the operation described in next chapters MUST BE DONE BY TRAINED PEOPLE ONLY. Before any
operation on the unit, be sure that the electric supply is disconnected.
7.1
GENERALITY
When installing or servicing the unit, it is necessary to strictly follow the rules listed in this manual, to conform to all the
specifications of the labels on the unit, and to take any possible precautions. Not observing the rules reported on this manual can
create dangerous situations.
After receiving the unit, immediately check its integrity. The unit left the factory in perfect condition; any eventual
damage has to be questioned to the carrier and recorded on the Delivery Note before signing it.
The company has to be informed, within 8 days, of the extent of the damage. The Customer should prepare a written statement of
any severe damage.
WARNING: The i-HP units are designed for outdoor installation and for places not directly accessible to unqualified
personnel. The place of installation must be entirely far away from fire risk. All the necessary measures should be
adopted in order to prevent the fire risk in the place of installation. The outdoor ambient temperature shall not
exceed 46°C. Above this value, the unit is no longer covered by the directives in force in the area of pressure
equipment.
WARNING: The unit should be installed so that adequate clearance is available for maintenance and repair. The
warranty does not cover costs related to platforms or handling equipment necessary for any maintenance.
All maintenance and testing operations should be carried out only by QUALIFIED PERSONNEL.
Before any operation on the unit, make sure the power supply is disconnected.
WARNING: MOVING PARTS, RISK OF DEATH.
Disconnect the power supply and ensure that the fan is stopped before opening the front panel.
The top part and discharge pipes of the compressor operate at high temperatures. Be sure to let the unit to become
cool before beginning any maintenance work.
Be careful to the surface of the driver boards’ heatsinks which could be too hot.
Be careful when working near condensing coils.
The aluminum fins are very sharp and can cause serious injuries.
After the maintenance operations, close the panels tightly with the fastening screws.
It recommended not to remove/tamper with the safety pressure switch and its connections in order not to endanger
its functionality as safety device. Burst risk.
