12
User's Manual
(1) Turn off the PC
(2) Pull out all the HDDs inside of ARAID
M500
(3) If the HDDs inside of ARAID M500 as system
drive, please use any system drive to connect with
the SATA port of PC’s motherboard, then use this
HDD for power-on.
(4) Execute ARAID Utility program
(inside of CD)
click “Load Firmware” locates at the right-hand
corner to start the upgrade process (please refer
right-hand side image)
(5) Select the firmware version to be upgraded
and then click the “Open File” at the lower
right corner
＊
Upgrading the Firmware For RAID 1 User
When doing the firmware upgrade, please do not insert any HDD inside of
ARAID M500, you need to remove all HDDs from upper and lower bays of
ARAID M500. Then follow below steps for the firmware upgrade. If you do
not remove any HDD from ARAID M500 before doing the upgrade, which
may cause ARAID M500 failure and unable to use it.
＊
ARAID Utility (firmware upgrade program) is only suitable for Windows O.S.
Warning
