10
User's Manual
(3) Rebuilding is completed.
2. Lower bay for Power-on
(1) Insert the lower bay hdd,
and power-on ARAID.
(2) After power-on process is
completed, then insert the
upper bay HDD into ARAID.
(3) Rebuilding is completed.
The HDDs which have been used with ARAID and also as an pair,
user can insert these two HDDs into ARAID and power-on ARAID
to use right away.
Hard Disk(s)
Two HDDs
(includes
O.S. & Data)
Two HDDs
(already use
at ARAID)
ARAID M500
Before the HDDs finish the rebuilding process, do not
pull out the source drive, which may cause system hang,
data lost, or system disorder, even the worst may result
in HDDs failure.
Warning
Table 5: Starting and Operation
